Hey Seniors! We have some exciting news for you guys! FIRST scholarships are officially up for you guys to apply to! Any Senior who has registered with FIRST is eligible to apply for one of these scholarships, so start writing! You can find specific details about each scholarship in this link:
Techno Titans’ first meeting will take place tomorrow at 3:45 PM. Please mark it on your calendar. We’re beyond excited to see everyone there!
The Techno Titans as a team has been adapting and working hard during these challenging times. Our team has transformed our operations and activists online in order to keep everyone safe. Over the past few weeks, we’ve hosted a successful virtual summer camp with 45 attendees. We’ve trained some of our team members on the engineering sub team how to CAD, and other sub teams have also been learning. We’re proud to say that Techno Titans as a team contributed to the fight against COVID-19, some team members used their knowledge and equipment to print face shields and donated them to local hospitals. These are the updates so far, and safety will always be our priority!
At the beginning of Week 6, we were able to start our final 2 mechanisms: the climber and Control Panel. By the middle of the week, we were able to build most of the structure for the climb and currently are waiting on a few parts to arrive to complete and test the mechanism. Friday was our official Stop Build Day and we spent the day in our school's cafeteria, building mechanisms, fixing minor issues, and testing our mechanisms. The team had a party to celebrate the occasion (with lots of cake)! By the end of Week 6, the mechanisms were built as far as they could, with the Control Panel mechanism ready to mount and the climber waiting on the last few parts. Electrical was able to reorganize their wires as well as finish wiring the shooter system. Programming was able to test their code on the existing mechanisms, apply current limits, and further develop their vision systems. Business is working on creating a robot reveal and our last few publications for awards. Our Dean's List nominees were also submitted by our mentors. During Week 7, we hope to dedicate our time to testing and driving to further prepare ourselves for our Week 1 competition!
During Week 5, we were able to integrate most of our major mechanisms and test them! The intake, hopper, feeder, and flywheel systems have been confirmed to work with no major issues spotted. With most of the basic mechanisms done, we will be shifting our focus to our other mechanisms: the climber and Control Panel. Fabrication worked on finishing the mechanisms associated with the power cells and the drivetrain. Fabrication also finished attaching and testing the intake, hopper, feeder, and shooter, alongside working on bumpers and starting to CNC some of the components for the control wheel and climb mechanisms. Business has gotten all awards submitted as well as ordered most of our team merch. The plan for Week 6 is to complete the other mechanisms and attach them and to take the robot up to the school where we will be able to test with our "mini-field." Friday will be the team's unofficial Stop Build Day celebration and we will be spending the remaining time until our first competition testing and driving!
Throughout Week 4, we were able to begin and complete most of our major mechanisms for the robot. The assembly for the hopper and intake began on Monday and were both completed in terms of fabrication work on Saturday. The shooter mechanism was built throughout the week and was also completed Saturday with the turret being close to finished as well. The feeder parts were CNC'ed on Saturday and the plan is to have assembly to begin on Monday. Fabrication field team also built a storage box to contain all the wood pieces to help better organize our workspace. Field team painted the power port and added reflective tape to help Vision team identify targets, and also completed the colored control panel and trench. The Electrical subteam successfully mounted and wired major components on the belly pan and assisted Fabrication and Programming with wiring and testing the mechanisms as they were built. Design is currently in the final stretch to complete the climb mechanism, and once completed, assembly will start during Week 5. Our Business team has made considerable progress on our awards as well as the GAFIRST mobile app, and are finalizing team publications. Our team has also selected Chairman’s presenters (Berkan, Kimberly, & Shiv) and appointed a new Safety Captain (Harish) alongside two new apprentices (Clara & Shriya). The plan for the upcoming week is to complete and finish the integration of all components of our robot, as well as finish up our award submissions and prepare for competition!
Since last semester, we have been getting our team ready for the heat of competition by training new members. Currently, we are finishing our robot, finalizing publications and starting work on awards, and overall getting ready for competition season.
The design subteam has been busy with using SolidWorks to create models of our robot and its mechanisms. The mechanisms we focused on include an adjustable turret shooter, a hopper and feeder system to funnel power cells into the turret, a folding and telescoping climber, and an over-the-bumper intake. Last week we held a preliminary design review to go over the general robot concept. We will be holding our critical design review this week; hopefully to finalize the robot design. Once the robot design is finalized, we will begin our side projects of designing a new robot cart and driver station.
For the past three weeks, we have been working on field elements, prototyping, and fabricating the drivetrain. The team building the field elements completed the Power Port and the Trench. Once the power port was finished, we were able to start testing the ball shooter prototype. We also prototyped mechanisms for the climb, the Control Panel, and hopper and feeder. Testing the prototypes helped us settle on a final design for our robot. We finished working on our drivetrain and were able to test it. Finally, we started CNCing the plates for the shooter and will start assembling next week.
For the past 3 weeks, the electrical subteam has been finishing the battery box project, starting an RFID battery tagging project, and started the electrical design for the robot. For the battery box, we installed doors and locks on both sides which will increase our efficiency in transporting to competitions. We constructed some crude prototypes on the RFID project. We will continue developing these plans with the purpose of creating a robust battery data management system. Additionally, a general plan of electrical systems design is underway, and we are using CAD modeling to help layout the robot's electrical components. Over the next few weeks, we will continue working on the plan and begin electrical fabrication on the robot.
We have been working on writing initial code in order to be able to rapidly iterate on the robot once any mechanism is made. In the first week, we spent time setting up all the members’ development devices and getting everyone up to speed with the documentation. During our time at the workspace, we flashed the RoboRIOs and worked with fabrication/mechanical/design to clarify our understanding of the robot design as it was evolving. By the end of this week, we will have written an initial code for all the 5 main subsystems.
Business has concentrated on updating our web page, creating outreach publications for sponsors and competitions, updating our business plan and sponsorship packet, and starting drafts for numerous awards. We have also made excellent progress on our game app, and have contributed to the GA FIRST app. Media has created and submitted a Safety Animation, and also created stock videos for the team.